Enclosure Integrity Testing | Software Products | Tools
Call 1(855)738-7683 or

Testing Buildings and Enclosures

FanTestic
Test to any worldwide building or duct leakage Code.
Fantestic Integrity - best way to perform your enclosure tests.
Enclosure Integrity test to NFPA or ISO with automated report generation.

Pressure Gauge

Software to configure parameters on the DM32 family of digital manometers.
Software to record two channels of pressure readings to a spreadsheet file...
Remotely control a DM32 from a PC with two-way communication over the...
GaugeRemote for Apple or Android devices
Control you DM32 WiFi from anywhere in the building with your iPhone
GaugeRemote for Apple or Android devices
Control you DM32 WiFi from anywhere in the building using your phone

Tester Tools

DM32 Flow Calculator

This tool calculates flow based on DM32 gauge measurements, and is a reference tool for the current and older Rounds of Published Flow Equation Parameters. Flow Charts illustrate flow capacity of Range Configurations at various backpressures.

Gauge Field Calibration Checker

This procedure checks the calibration of each channel against another channel in both positive and negative directions and also checks all tubes for leaks and blockages.
Microsoft Excel is required.

Number of Fans Calculator (Blower Door Testing)

This tool aids residential and large building blower door testers to determine the number of Retrotec fans required for testing. 
Microsoft Excel is required to use this tool.

Number of Fans Calculator (Clean Agent Enclosure Integrity Testing)

This tool aids Clean Agent Enclosure Integrity testers to determine the number of Retrotec fans required for testing. 
Microsoft Excel is required to use this tool.

Effects of Stack & Interior Constrictions on Blower Door Tests

Simulation to demonstrate stack pressures and interior constrictions in large buildings. Solution is usually to test in both directions. 
Required software:  Microsoft Excel 2007 or newer.

Air Leakage Unit Conversion Calculator

This spreadsheet will help testers to convert between various air leakage units, both in imperial or metric.
Required:  Excel 2007 and later.

Reporting Software

Duct Leakage Test Report Generator (for Excel 2010 and higher)

Easy to use software developed by Retrotec to allow users to automatically generate professional reports that display test results with potential energy savings. Test details and contact information are easily entered into a spreadsheet with dropdowns and then display on the report printout. This is for use with the DucTester 200 or 300 series.  For Microsoft Excel 2010 and newer.

Duct Leakage Test Report Generator (for Excel 2007)

Easy to use software developed by Retrotec to allow users to automatically generate professional reports that display test results with potential energy savings. Test details and contact information are easily entered into a spreadsheet with dropdowns and then display on the report printout. This is for use with the DucTester 200 or 300 series.  For Microsoft Excel 2007 only.

PC Software for Gauges

DM32 Software Suite (Virtual Gauge, Data Logger, and DM32 Configurator)

All the software you will need to use your computer with the DM32.

DM32 Configurator

Software to configure parameters on the DM32 family of digital manometers, provided as part of the DM32 Software Suite. The DM32 Configurator software updates parameters on gauges including Network settings, and is used to update the onboard software on the gauge (firmware) when the manufacturer releases new features.

Data Logger

Software to record two channels of pressure readings to a spreadsheet file in real time, for use with the DM32 or DM-2 digital gauge.

Virtual Gauge

Software to remotely control and reflect the state of a real gauge connected to a computer, or to generate a simulated gauge on the computer which mimics the operation of a DM32 family gauge.

Apps for DM32 WiFi

GaugeRemote for Android Devices

Control the WiFi model of Retrotec's DM32 digital pressure gauge wirelessly with the GaugeRemote app on Android!

GaugeRemote for Apple iOS Devices

Control the WiFi model of Retrotec's DM32 digital pressure gauge wirelessly with the GaugeRemote app on Apple devices!

USB Drivers

DM-2 Driver (32-bit)

Microsoft Windows XP/Vista/7/8 32-bit driver for DM-2 Digital Gauge.

DM-2 Driver (64-bit)

Microsoft Windows XP/Vista/7/8 64-bit driver for DM-2 Digital Gauge.

DM32 Driver (32-bit)

For those who use Microsoft Windows XP/Vista/7/8 32-bit operating systems and need to communicate to their DM32 or DM32 WiFi from their computer.
NOTE: This is only required if your DM32 Software Suite installation has failed.

DM32 Driver (64-bit)

For those who use Microsoft Windows XP/Vista/7/8 64-bit operating systems and need to communicate to their DM32 or DM32 WiFi from their computer.
NOTE: This is only required if your DM32 Software Suite installation has failed.